Mgo-PSZ ceramic is a partially magnesia stabilized zirconia.  It has good fracture toughness and impact resistance.  My Mg-PSZ will not go through phase transformation at elevated temperatures, so it is a good candidate material where the operating temperature is above 300 degrees C.

MgO-PZSZ Properties

Color – Yellow

Density (g/cc) – 5.7

Flexural Strength (Mpa) – 720

Hardness (Gpa) – 12

Thermal Conductivity (W/m K) – 2.2

Compressive Strength (Mpa) – 1750

The above data is representative of typical properties you can expect when using the above materials.  These are “real world” numbers and are not lab specimen numbers.  Method of manufacture, part size, part shape and other factors can affect material properties of components.  I provide this information as a guide only and implies no warranties or guarantees.